When you hire a plumber, it can cost a lot of money for even a very simple repair that you could have done yourself with some basic plumbing knowledge. Don’t waste money on professional plumbers again! Read on for some tips on solving your own plumbing problems with tools you have at home.

Check the filters in your furnace, regularly. If these filters have not been cleaned or replaced recently, they may become clogged. This will affect how well your furnace is able to work, meaning that you may not have enough heat during the winter. Take this simple step, as soon as the weather starts to become cold.

If your pipes bang when you turn on the water, and all the pipes are anchored correctly, you should add some straps or cushion the pipes with a rubber blanket. There may be times when you will need to do both. Make sure that if you have copper pipes, you are not using galvanized straps.

The next time you have a clogged drain, avoid the simple solution of dumping drain-clearing chemicals into the pipes. While this method involves the least amount of effort, the chemicals in these liquid cleaners are destructive to your piping. Instead, consider using a little bit of elbow grease with a plunger, snake, or other device designed to clear your clog without chemicals.

If you have bad water pressure in the shower, the showerhead might be clogged. Take a plastic baggie, fill it with regular vinegar, and tie it to the showerhead so that the showerhead is covered. Leave it overnight. In the morning, take the baggie off and use a small toothbrush to scrub away any mineral deposits.

If your water is coming out black, then most likely you have an iron and magnesium issue to your water. You need to contact a water softener company, and get them to come out and assess your water. They will be able to fix the problem by adding a water softener.

During the winter, preventing frozen pipes when you live in a small dwelling can be something good to know. Frozen pipes will not only stop your flow of water but can crack and damage pipes. By running a little water out of every faucet during the coldest parts of the day, you can avoid this.

Many people deal with clogged toilets. However, if your toilet will not flush every time, the water rises to the top, and there is bubbling effect occasionally, this can be due to a much deeper blockage in the main pipe. The main pipe must then be cleaned in order for your toilet to work properly.

Have your pipes in your plumbing system frozen? You can skip the cost of hiring a plumber by using this method. First, open the faucet so steam produced by the thawing process can escape. Begin thawing close to the faucet, and move down the line as each section thaws out. Use a hair dryer or a heat lamp to warm along the pipe. Even though this method consumes quite a bit of time, it is safer than most other heating methods. Furthermore, it requires no cleanup.

If you are looking to get new piping in your home, try to stay away from copper ones. Copper tends to have problems, due to water and soil corrosion. It is also harder to install these kinds of pipes. Steel or lead pipes tend to offer the best quality and are the most durable.

As you read in the beginning of this article. Professional-plumbing services are costly, and many plumbing problems can be solved by anyone who knows what needs to be done. Hopefully, this article has given you the knowledge to avoid an expensive call to a professional plumbing service in the future.